High Quality 3D Printing Filament ABS/PLA 1.75mm
PLA Filament:
Specification:
Diameter: 1.75mm
Net Weight: 1kg
Melting Point: 190° C
Printing Temp.: 190-210° C
Color: red, blue, yellow, orange, pink, purple, green, silver, grey, gloden, brown, white, black, transparent and so on
Package: vacuumed polybag + box + carton
Features:
1. 100% brand new and high quality.
2. can be printed in low temperature and won't curl and warp.
3. with high intensity and stiffness, can print structure parts of 3D printer for DIY users.
4. excellent formability, low thermal denaturation and only 0.3% shrinkage, firm adhesion between layers.
5. as an environmental biomaterial, extracted from corns, has good surface gloss and smoothness, no odors in printing.
Quality Control:
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material.
2. Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser runs automatically to control the diameter of filaments and keeps it in a right range of 1.75/3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry, each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
ABS Filament:
Specification:
Diameter: 1.75mm
Net Weight: 1kg
Melting Point: 220° C
Printing Temp.: 220-240° C
Color: red, blue, yellow, orange, pink, purple, green, silver, grey, gloden, brown, white, black, transparent and so on
Package: vacuumed polybag + box + carton
Features:
1. 100% brand new and high quality.
2. Cost-effective, can be processed in wide range temperature.
3. High strength, good toughness, can print structure parts of 3D printer for DIY users.
4. Softer than PLA.
Quality Control:
1. All of our 3D printer filaments are 100% virgin material, never use recycled material or regrind material.
2. Before the mass production, our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser runs automatically to control the diameter of filaments and keeps it in a right range of 1.75/3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry, each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
